LG 27LQ615S Manuel D'utilisation page 14

CONNECTIONS
You can connect various external devices to the TV. Supported
external devices are: HD receivers, DVD players, VCRs, audio systems,
USB storage devices, PC, gaming devices, and other external devices.
For more information on an external device's connection, refer to the
manual provided with each device.
NOTE
y The external device connections shown may differ slightly from
illustrations in a manual.
y Connect external devices to the TV regardless about the order of
the TV port.
y If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information about recording, refer to the manual
provided with the connected device.
y If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
y Refer to the external equipment's manual for operating
instructions.
y In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast, or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate, or adjust the brightness and contrast on the [Picture]
menu until the picture is clear.
Depending upon the graphics card, some resolution settings may
not allow the image to be positioned on the screen properly.
y When connecting via a wired LAN, it is recommended to use a CAT
7 cable. (Only when
y Ethernet only supports 100 Base-T.
12
port is provided.)
Connecting to an antenna or cable
Connect an antenna, cable, or cable box to watch TV. The illustrations
may differ from the actual items and an RF cable is optional.
CAUTION
y Make sure not to bend the copper wire of the RF cable.
Copper wire
y Complete all connections between devices, and then connect the
power cord to the power outlet to prevent damage to your TV.
NOTE
y Use a signal splitter to use 2 TVs or more.
y DTV Audio Supported Codec: MPEG, Dolby Digital.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Depending upon the model, a cable may not be provided.
NOTE
y USB port supports 0.5 A electric current. If you need more electric
current in case of HDD, use the separate power adaptor.
y Supported HDMI Audio format:
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), PCM
(32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz) (Depending upon
model)