Publicité
Les langues disponibles
Les langues disponibles
PAIRING
The Yada Backup Camera included is already paired with the monitor. If you can not see the Camera
image, pair the Camera with the following steps:
1. Turn on your vehicle and place in reverse gear. This will power the Monitor and the Camera.
2. On the monitor:
a. Press "Menu"
b. Go to "Pair Camera"
c. Press "Parking Aid line" to confirm
d. The unit is now in pair mode - if the monitor is able to connect with the camera, the
display will show "Pair OK".
If no camera is found, then the display will show "Pair Fail". If you receive a "Pair Fail" message,
please call our technical support to assist in troubleshooting.
9
Publicité
