Publicité
Les langues disponibles
Les langues disponibles
General instructions and regulations
Use
All local regulations including those referring to national and European standards must be observed when installing
•
the appliance.
Ensure there is sufficient ventilation/air supply in the room where the stove is installed. Air extractors such as a
•
cooker hood may cause problems due to flue gases escaping from the stove into the room.
The appliance is not suitable for a shared flue system.
•
The appliance must be installed on a floor having sufficient bearing capacity.
•
Ensure adequate access for cleaning the appliance, the flue-gas connection and the chimney.
•
Safety instructions
•
Glass is quite susceptible to breaking and broken glass is quite sharp. Take appropriate measures.
•
For general safety, we refer to the VCA guidelines.
Note: After installation, ensure there is no inflammable and/or explosion-hazardous material in or on the stove such
•
as a spray can, packing material and the like.
Safety distances for Boxer Plus
•
Rear wall: 20cm. Temperature at safety test; 65°C.
•
Side wall: 40cm. Temperature at safety test; 77°C.
Specifications for Boxer Plus
•
Nominal power = 10 kWh.
•
Flue gas mass flow = 8.3 g/s
•
Appliance weight = 245 kg
•
Minimum chimney draught = 12 Pa
•
Flue gas temperature directly over the stove = 263 °C
Installation
To secure the warranty, the Boxer Plus must be installed by a properly qualified person employed by a dealer
•
recognized by Harrie Leenders Haardkachels. See leenders.nl for a current list of addresses of recognized
dealers or contact the manufacturer.
The stove is susceptible to scratching. Handle with care.
•
•
After installation, check the draught by burning some kindling wood.
9
Handleiding Boxer Plus, wijzigingen voorbehouden, oktober 2012. Harrie Leenders Haardkachels BV
All manuals and user guides at all-guides.com
Boxer Plus
Installation instructions • EN
Publicité
