Harrie Leenders Boxer Plus Manuel D'utilisation page 10

Boxer Plus Installation
1. Top or rear outlet
• Remove the convection rear wall to be able to get
to the rear connection; push the convection wall upwards
and lift it out of the slotted holes.
• Fix the top or rear outlet. Fit flat strip (included in
delivery) into place at the edge at both the outlet
and the cover plate.
• Fixing the bolts may need some finger dexterity;
first install the outlet and only then the cover plate.
That way, it will be a little easier.
2. Transport
• Place protective material between the hand truck and
the side element.
• Before moving, place some auxiliary sliding means
(sliding pieces, pieces of carpet, etc.) under the Boxer Plus.
• Then fix the pipe and any connection to be made for air
supplied from the floor or wall.
• Finally remove the transport brace.
10 Handleiding Boxer Plus, wijzigingen voorbehouden, oktober 2012. Harrie Leenders Haardkachels BV
All manuals and user guides at all-guides.com