RealFlame G1200 Manuel D'instructions page 7

Step Seven
-Insert 4pcs shelf panel supports to the holes of panel (2), (6), (3), (7) respectively. Keep every 2
supports on parallel.
-Put on 4pcs shelf panel (13) on the shelf panel supports.
13
13
Dust the mantel periodically.
Using a soft cloth and a wood cleaner, wipe the mantel clean in the direction of the grain to
minimize the appearance of scratches and scuffs in the finish.
Do not use water to clean mantel. Water may cause swelling, warping or stains if allowed to
penetrate the finish of the mantel. Use protective pads or cloths whenever possible.
Avoid placing mantel in rooms with lots of humidity or where humidity could be a problem.
This may cause warping to the mantel.
Avoid direct sunlight if possible to reduce the possibility of bleaching the finish. If direct
sunlight cannot be avoided, the mantel should be placed so that sunlight hits the mantel
evenly so sunlight bleaching is even and consistent.
All manuals and user guides at all-guides.com
G
Care and Cleaning
7
G
13
13