Samsung HW-B53C Manuel Complet page 11


CH LEVEL
SOUND
MODE
CH LEVEL
WOOFER

TONE
CH LEVEL
CONTROL
Sound Control

Bluetooth
PAIR

Play / Pause
PAIR
SOUND
SOUND
MODE
MODE
WOOFER
VOL WOOFER
TONE
CONTROL
WOOFER
By pressing the button, you can adjust the volume of the each speaker.
TONE
• Press the button to select VIRTUAL CENTER LEVEL and then adjust the volume
CONTROL
between -6~+6 by using the Up/Down buttons.
• If the Rear Speakers (sold separately) are connected, the setting REAR LEVEL is
supported. To adjust the volume of the REAR LEVEL between -6 to +6 by using the Up/
Down buttons.
By pressing the button, you can set the audio function. The desired settings can be
adjusted using the Up/Down buttons.

AUDIO SYNC NIGHT MODE ON/OFF
– AUDIO SYNC
If the video on the TV and audio from the Soundbar are not synchronized, press the
(Sound Control) button to select AUDIO SYNC and then set the audio delay
between 0~300 milliseconds by using the Up/Down buttons. (Not available in "USB"
or "BT" mode.)
– NIGHT MODE ON/OFF
This mode is optimized for nighttime viewing with the settings adjusted to bring the
volume down but keep the dialog clear.
– VOICE ENHANCE ON/OFF
This mode is makes it easier to hear spoken dialog in movies and TV.
• The NIGHT MODE, and VOICE ENHANCE audio function can be turned ON/OFF by
using the Up/Down buttons.
• Press and hold the
for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are
selectable using the Left/Right buttons and each can be adjusted to a setting between
-6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to "STANDARD".)
Switch the Soundbar to Bluetooth pairing mode.
Press the PAIR button and wait for the "BT PAIRING" screen to connect to a new
Bluetooth device.
You can also play or pause music by pressing the button.

VOICE ENHANCE ON/OFF
(Sound Control) button for about 5 seconds to adjust the sound
ENG - 11