Ectaco Partner EFR430T Manuel D'utilisation page 22

All manuals and user guides at all-guides.com
ECTACO Partner ® EFR430T
Press ENTER to start the transfer.
Start the data transfer first on the receiving device, then on the sending
device.
To receive data, select the Receive data transfer mode. Press ENTER and
the transfer will begin.
The time span between the data transfer startup on the PC and the device
must not exceed 30 sec.
Note that in the Receive data mode, the newly transferred data will replace
all the old information saved in the corresponding sections of your device. In
case if empty sections are transferred, all data in the corresponding sections
of the EFR430T will be erased.
Always back up your important data! Neither the manufacturer nor the
dealers assume any responsibility for lost or corrupted data.
It is recommended to use an external power supply while using the PC-Link
function.
Personalize your ECTACO Partner
your personal records by selecting options in the Setup section.
Enter the Setup section.
Most of the Setup section options are very easy to adjust. Unless stated
otherwise, enter a subsection and select the desired option with
press ENTER to confirm your choice.
Interface language
The default interface language of the EFR430T is English. You can switch
interface language between English, French, and Russian.
Slang lock
In this subsection you can hide slang words or phrases contained in the
dictionaries. For example, you may forbid your children to access slang.
To set Slang lock OFF, enter the showslan password and press ENTER.
SETUP
EFR430T and ensure good maintenance of
®
22
User Manual
, . Then