Publicité
Les langues disponibles
Les langues disponibles
7
With the spout facing forward, carefully install the Faucet Supply Hoses (7A)
through the center hole of Mounting Ring (7B).
8 SECURING FAUCET
8
8D
8C
From underneath sink, secure the faucet by placing the Metal Washer (8A) and
7
the Long Nut (8B) (
/
hex.) onto the Mounting Post (8C). Make sure that the
16
bumps on the Metal Washer (8A) are facing up. Tighten loosely, make sure
Handle (8D) swings equally in both directions. Firmly hand tighten Long Nut
(8B). Secure Long Nut (8B) not to exceed a 1/4 turn.
Caution: Do not over tighten!
9 WATER SUPPLY CONNECTIONS
7A
7B
8D
8C
8A
8B
8A
8B
ENGLISH
9
9C
9B
9A
9D
Thread the ½" NPSM Adapter (9A) into the ⅝" Nut (9B). Tighten using wrenches
on both the Adapter and the Nut. Make connection to the Faucet Inlet (9C).
Repeat for the other tube. Connect water Supply Lines (9D) to Faucet Inlets
(9C). Hot water supply lines go into left inlet. Cold water supply lines go into
right inlet. (Supply lines not included). Please follow manufacturer's instruc-
tions when installing suppy lines..
10 UNIT START UP
10
Turn on hot and cold water supplies, and check for leaks above and below
the sink.
11 VALVE FUNCTION
11
CLOSED
11B
By rotating the Lever Handle (11A) away from the Faucet Body (11B), the valve
will be activated allowing water to flow. The water flow will increase by continuing
to rotate the Lever Handle (11A). By rotating the Lever Handle towards you,
the water temperature will decrease to cold flow only. By rotating the Lever
Handle away from you, the water temperature will increased to hot flow only.
The Spout (11C) can be rotated around the Faucet Body (11B) in any direction.
MAINTENANCE & CARE
3
9C
HOT
FAUCET FUNCTIONS
COLD
OPEN
11B
11A
11A
11C
9B
9A
9D
COLD
HOT
Publicité
