Publicité
Les langues disponibles
Les langues disponibles
1. Speed knob
2. Timer knob
3. Knob for rotating grid
4. Grid
Place the fan on a flat, dry and stable surface, and insert the plug of the fan in a socket.
Select the desired speed by turn the knob (1):
0 =off 1 =minimum speed 2 =medium speed 3 =maximum speed
TIMER
Turn the timer knob for set how long the fan must work before automatically shutting down
(from 0 to 60 minutes).
Please note: when the knob is in Off position the fan doesn't work also if turn the speed
knob.
Please note: when the knob is in On position the fan work according to the set speed. If the
knob is in On position automatically shut down isn't set, for turn off the fan rotate the knob
in Off position manually.
ROTATING GRID
Unscrew slightly the knob (3) counterclock wise to activate the rotating grid (--> LOOSEN).
Screw the knob (3) clockwise to lock the rotating grid (--> FASTEN).
Before carrying out the regular cleaning operations turn off the fan and unplug it.
DO NOT disassemble the fan: this fan cannot be disassembled.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
When you do not use it, after cleaning it, store the fan in a dry place.
(EN) INSTRUCTIONS FOR USE
(EN) MAINTENANCE
8 / 32
Publicité
