Intenso PHOTOANGEL Instructions D'utilisation page 11

e) Changing the Settings
Choose in the Main Menu the function Setup to individually set up your device. Navigate with
Timer are available. Confirm your selection with the Play/Pause [ ] button.
Settings
Language
Product Information
General Firmware Update
Setup
Factory Settings
Auto Run
Brightness
ECO Display Off
Turn Off
File
Diashow
Photo
Duration of
visualisation
Scaling
Date
Time Format
Time
Clock |
Date |
Timer
Timer
General, Display, Multimedia and Time | Date |
Description
Select the desired language.
Displays the current firmware version.
Should a firmware update be available at www.intenso.de the update
can be installed through here.
Reset the device to the factory settings.
Pick the mode your photo frame will begin on after turning on. (Photo,
Calendar, Last used function).
Adjust the brightness of the TFT Display.
Set the amount of time of inactivity which will turn off the display.
Set the amount of time of inactivity which will turn off the photo frame.
Selection of list for the photo reproduction
Setting up of the passage effect
Setting up of the duration of visualisation
Setting up oft he display fort he photo mode
Set the current date.
Set the time format: 12 Hours (AM / PM) or 24 hours.
Set the current time.
On / Off Activate / Deactivate the automatic switching on / off.
Turn On Set the time for an automatic power on.
Turn Off Set the time for an automatic power off.
Frequency Set the frequency of the automatic power on / off.
(Daily, Mon.-Fri., Weekends, Once)
GB - 4