Télécharger Imprimer la page

Kohler K-2205 Instructions D'installation page 4

Masquer les pouces Voir aussi pour K-2205:

Publicité

Les langues disponibles

Les langues disponibles

Marble
Foam
Padding
Wood
Screw
Anchor
Screw
2. Install the Lavatory
Cut out the opening by carefully following the pencil line traced
from the template.
NOTE: The screws and anchors provided should be used on
countertops with a minimum 1" (2.5 cm) thickness. For thinner
countertops, use appropriate anchors and fasteners (not provided).
For Wood Countertops
Mark and pre-drill the wood screw holes at the locations shown
on the template.
Waterproof any exposed areas of wood.
For Marble/Stone Countertops
Position the countertop upside down on foam padding to protect
the surface. Mark and drill 3/8" holes 5/8" (1.6 cm) deep at the
locations shown on the template.
Use a setting tool and hammer to secure the anchors.
For All Undercounter Installations
If the countertop has not been installed, install it at this time.
Drill the faucet holes according to the faucet installation
instructions.
Install the faucet to the countertop according to the faucet
manufacturer's instructions.
1018894-2-H
All manuals and user guides at all-guides.com
Setting Tool
Anchor
Clamp
Apply
sealant.
Undercounter Installation
4
Kohler Co.

Publicité

loading