Safety Notes; Care And Cleaning - QEO ECOLINE EL 607 Mode D'emploi

EN

SAFETY NOTES

5
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
Measurements through glass or plastic windows; dirty laser emitting win-
dows; after instrument has been dropped or hit. Please check accuracy.
Large fluctuation of temperature: If instrument will be used in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.

CARE AND CLEANING

Handle measuring instruments with care. Clean with soft cloth only after
any use. If necessary damp cloth with some water. If instrument is wet
clean and dry it carefully. Pack it up only if it is perfectly dry. Transport in
original container / case only.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
It cannot be completely excluded that this instrument will disturb other ins-
truments (e.g. navigation systems); will be disturbed by other instruments
(e.g. intensive electromagnetic radiation nearby industrial facilities or radio
transmitters).
CE-CONFORMITY
Instrument has CE-mark according to EN 61326:1997 , EN 55022,
EN 61000-4-2/-3.
15
ECOLINE