Burley Honey Bee Manuel page 7

Converting to Stroller Mode
1. Pull fork as shown (Figure 12), then rotate wheel down
fully. Fork will automatically secure into the locked
position.
Attaching the Jogging Tether
Wrap the strap around the handlebar center, slide the
tether end through the loop on the other end of the strap
and tighten securely (Figure 13).
Converting to Trailer Mode
1. Pull fork down (Figure 14) and rotate up into trailer
mode as shown. Fork will automatically lock into
trailer position when positioned correctly (Figure 15).
WARNING
Stroller wheel must always be folded up, in trailer mode,
before pulling behind a bicycle. Failure to position stroller
wheel in trailer mode before cycling could result in an
accident and serious injury or death.
OWNER'S INSTRUCTION & SAFETY MANUAL
Figure 12
Figure 14
Figure 13
Figure 15
BURLEY.COM ENG
7