Cleaning - TENA SmartCare Change Indicator Mode D'emploi

Change Indicator
The transmitter and sensor strip should never be cleaned
separately – only clean the Change Indicator when it is fully
assembled. Clean the Change Indicator using a cloth or a
disinfectant when required.
We recommend using:
of the sensor strip.
The assembled Change Indicator can be rinsed under a tap.
between the Change Indicator and the incontinence product.
Gateway
Clean the gateway with a dry cloth when needed.
WARNING
Clean the Change Indicator when fully assembled to prevent
water from entering the device.
Ensure adequate disinfection procedures are followed for
residents with infectious diseases.
Do not clean in the washing machine.
Do not submerge in water.
23
TENA SmartCare Change Indicator

CLEANING

TM/MC
EN