Tena Underwear - TENA SmartCare Change Indicator Mode D'emploi

TENA Underwear

TENA SmartCare Change Indicator
incontinence product is folded and before it has been applied to the resident.
NOTE
Ensure the Change Indicator is straight. Smooth any
Change Indicator has full contact with the TENA
absorbent product.
1
Find the front
4
Place tightly
TM/MC should always be attached when the
2
Keep folded
5
Every time you change an
incontinence product, press both
buttons simultaneously for two
seconds to reset the transmitter
and register the change in the
system.
21
TENA SmartCare Change Indicator
3
Align with the top of the
thicker absorbent area
6
Apply the absorbent product
with the Change Indicator
to the resident.
TM/MC
EN