Publicité
Les langues disponibles
Les langues disponibles
There is no voltage in the AC sockets:
• The equipment or extension cords connected to the
generator are damaged;
• The engine has been connected with the equipment
connected to the AC sockets;
• The AC pilot light (green) turns off;
There's no voltage at the DC sockets:
• Safety device (DC Protector) is in "OFF" position;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by its use.
• Change the used equipment or extension cords;
Repair the equipment or extension cords used;
• Unplug all equipment from the sockets and reconnect
the generator;
• Stop the engine and start again;
• Put the DC protector into " ON" position;
We declare, under our sole responsibility, that the product
labelled INVERTER GENERATOR 1250 with code VIGI1250
complies with the following standards or normative
documents:
EN ISO
8528-13:2006,
61000-6-1:2007,
as per defined by directives:
2006/42/EC - The Machinery Directive
(EU) 2017/656 – Euro V Directive
(e9*2016/1628*2017/656SHB3/P*1036)
2014/30/EU - The Electromagnetic Compatibility Directive
S. João de Ver,
06th January 2020
Central Lobão S. A.
Technical supervisor
Hugo Santos
EN 55012:2007+A1, EN
Publicité
