MikroTik CCR2004-1G-12S+2XS Manuel D'installation page 4

Installations Instruction
MikroTik CCR2004-1G-12S +2XS
1
Connecting the components
1. Insert the SFP module into the SFP slot 2 of the router.
2. Connect the router to the power supply.
3. Connect your computer to the router using an Ethernet cable.
2
Download script file
Download one of the following configuration files (with or without IPv6). You
will need the file in step 6.
With IPv6: https://www.init7.net/de/support/routerinfos/mikrotik-
ccr2004_fiber7-x2-2-2.auto.rsc
Without IPv6: https://www.init7.net/de/support/routerinfos/mikrotik-
ccr2004_fiber7-x2_without-ipv6.auto.rsc
3
Assigning a static IP address
Vergeben Sie Ihrem Computer eine statische IP-Adresse. Zum Beispiel
192.168.88.2 (nicht 192.168.88.1, die gehört dem Router).
Operating system: Linux
1. Open «Settings».
2. Click on «Network».
3. Select the detected interface (either PCI Ethernet or USB
Ethernet).
4. Select «IPv4» and the method «Manual».
5. Address: 192.168.88.2
Netmask: 255.255.255.
Operating system: Windows
1. Click on the Windows symbol. Select «Settings»
-> «Network and Internet».
2. Click on the Ethernet network you are connected to.
5 Instruction | Fiber7 25 Gbit/s, Fiber7 10 Gbit/s | MikroTik
3. Under «IP assignment», select «Edit».
4. Under «Edit IP settings», select «Manual».
5. IP address: 192.168.88.2
Subnet prefix length: 255.255.255.0
Operating system: MacOs
1. Click on the Apple icon in the upper left corner. Click on
«System Preferences» and select «Network».
2. Select the network connection «Ethernet».
3. Select «Manually» under «Configure IPv4».
4. IP Address: 192.168.88.2
Subnet Mask: 255.255.255.0
4
Connecting the router
Connect your computer to the Mgmt port of the router (RJ45 connector,
labelled «Mgmt port»). Open a web browser and enter 192.168.88.1 in the
address bar. Log in to the router and select «WebFig». (Note: No login data is
required for the initial connection.)
5
Set up IPv6 (If you do not need IPv6, go to step 6.)
Select the item «Packages» in the left menu bar and click on the package ipv6.
Check the «Enabled» box and click «Enable». Reboot your device via «System» ->
«Reboot» -> «Yes».
06 | 2023 | Nr. 03
EN EN
6