Gastro M C64G Serie Instructions Pour L'installation, Emploi Et Entretien page 39

Replacing the hotplate.
• Remove the bottom of the appliance.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
20.4 ELECTRIC OVEN
Replacing the heating element
• Working inside the oven chamber and from behind of the
appliance, disconnect the heating element and remove the
screw from the flanges.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the fan (mod.ventilated oven)
• Remove racks, rack-holders and fan protection from inside
the cooking chamber.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the fan motor (mod.ventilated oven)
• Remove the fan protection from inside the cooking chamber.
• Remove the posterior panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
Replacing the temperature thermostat, the control knob,
the indicator lamp and the safety thermostat
• Remove the control knob.
• Remove the front panel
• Disconnect the component from the wiring.
• Remove the bulb from the support bracket on the inside of
the oven chamber (thermostat).
Replacing the door seal.
• Remove the seals ( fitted in place around the edges ).
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse or-
der.
21 CLEANING THE INTERIOR
• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.
22 MAIN COMPONENTS
22.1 GAS HOB
• Gas tap
• Main burner
• Pilot burner
• Thermocouple
22.2 GAS OVEN
• Gas tap
• Main burner
• Thermocouple
• Igniter
• Piezoelectric ignition
22.3 ELECTRIC HOB
• Control knob
• Indicator light
38
22.4 ELECTRIC OVEN
• Control knob
• Working thermostat
• Safety thermostat
• Heating element
• Indicator light
• Fan motor (mod.ventilated oven)
• Door seal