What is Included
•
Maverick Force 2 SoloWash
•
Seetronic Powerkon IP65 power cable
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Power Linking
It is possible to power link Maverick Force 2 SoloWash products. See the table below for the current draw at each voltage
and frequency:
Current Draw
Never exceed 12A on a single circuit. Power-linking cables can be purchased separately.
Mounting
Before mounting this product, read the
clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
trusst.com/productcategory/truss-clamps.
Mounting Diagram
Omega
bracket (2x)
Overhead mounting
Control Panel Description
Button
Name
Function
<UP>
Navigates upwards through the menu list or increases the numeric value when in a function
<MENU> Exits from the current menu or function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function
<LEFT> Navigates leftwards through the menu list
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<RIGHT> Navigates rightwards through the menu list
Maverick Force 2 SoloWash QRG Rev. 2
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
100 V, 60 Hz
120 V, 60 Hz
6.82 A
5.57 A
Safety
Notes. Use at least 2 mounting points per product. Make sure the mounting
Mounting clamp
Safety cable
•
2 omega brackets with mounting hardware
•
Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
208 V, 60 Hz
3.24 A
Surface mounting
Screw Color
Yellow/Brass
Silver
Green
230 V, 50 Hz
240 V, 60 Hz
3.07 A
2.93 A
EN
http://
2