Doro HearPlus 325a Mode D'emploi page 19

English
All manuals and user guides at all-guides.com
Making a call
See the telephone manual for how to make a call; the most common procedure is explained below.
1. Enter the desired number.
2. Press the call button on the telephone.
3. End the call with the phone's disconnect button.
Redial function
When used with certain mobile phones you can redial. This is not possible when using active sound equipment.
Press . The last number dialled will now be redialled.
Receiving a call
See the telephone manual for how to receive a call; the most common procedure is explained below.
1. Wait for ring signal.
2. The incoming call is answered by pressing .
3. End the call with the phone's disconnect button.
Automatic answering of calls can be activated by pressing four times. To deactivate, press four more times.
Please note!
Headphones must always be connected to the receiver to be able to hear.
Make sure that the receiver's inbuilt microphone is not covered by clothing or suchlike during calls.
If the receiver is being used with the transmitter to listen to the TV or other audio source, it will automatically switch to
telephone mode when there is an incoming call. When a call is finished, the receiver will switch back to the transmitter
again. When used with certain mobile phones a reconnection has to be made (please refer to the telephones user
manual).
Using with other sound equipment
The headset can be used with most Bluetooth-compatible sound equipment, such as laptops, computers with
Bluetooth USB adapter, handheld PCs, MP3 players and audio equipment with Bluetooth adapter. Registration of
the equipment to the receiver must always occur before use. The headset will function in different ways depending
on the sound equipment being used, see the manual for the sound equipment you intend to use with the headset.
Note that the sound equipment must be A2DP compatible in order to work properly.
1