Publicité
Les langues disponibles
Les langues disponibles
TEMP :
•
Choose temperature unit
FAST DIMMER
Enter this sub-menu to bypass [DIM Mode] in case of rapid channel change from Dimmer to 0.
•
Choose
[ON]
or [OFF] to change dimmer behavior.
DIM MODE
Enter this sub-menu to set the speed of the Dimmer.
•
Choisir [DIM0] for instant dimmer, [DIM1] for a 0,25 second dimmer speed,
[DIM2] for a 0,5 second dimmer speed, [DIM3] for a 0,75 second dimmer speed,
[DIM4]
or
for a 1 second dimmer speed.
REGULATED POWER
Enter this sub-menu to set the power mode:
To limit the power drop due to the rise of temperature, the power is limited as soon as ParKolor 200 DW is switched
on according to the ventilation mode chosen.
Off mode : Max power 400W in all ventilation modes
On Mode:
Fan High > 250W - Fan Auto > 250W - Fan Quiet > 240W - Fan Silent > 170W.
•
Choose [ON] ou
DISP.Set :
Enter this sub-menu to define the display mode
•
[ADDR]
to display the DMX adress.
•
[Disp.CH] to display the DMX values.
•
[Slave] to switch the PARKOLOR 200 HD to slave mode.
FAN.Set :
Enter this sub-menu to define the cooling mode
•
[Auto]
fans in automatic mode
•
[High] fans in forced operation mode at 100%
•
[Quiet] fans in silent mode
•
[Silent] fans OFF
DIM CURVE
Enter this sub-menu to define the Dimmer curve.
•
[Linear] - The increase in light intensity is linear as the DMX value increases.
•
[Square]
- Light intensity control is finer at low levels and coarser at high levels.
•
[Inv-Square] - Light intensity control is coarser at low levels and finer at high levels.
•
[S-Curve] - Light intensity control is finer at low and high levels and coarser at medium levels.
Linear Curve
Page 28
[CELSIUS]
or [FAHRENHEIT].
[OFF]
to select Regulated Power mode or not.
Square Curve
Inv-Square Curve
S Curve
Publicité
