Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS.
WARNING! When using tools, basic precautions should always be followed, including
the following.
WORK AREA
Keep the work area clean and well lit. Cluttered benches and dark areas
increase the risk of electric shock, fire, and injury to persons.
Do not operate the tool in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. The tool is able to create sparks resulting in the
ignition of the dust or fumes.
Keep bystanders, children, and visitors away while operating the tool. Distractions
are able to result in the lost of control of the tools.
PERSONAL SAFETY
Always wear eye protection. Operator and others in the work area should always
wear ANSI-approved safety goggles with side shields. Eye protection is used to
guard against flying fasteners and debris, which may cause severe eye injury.
Always wear hearing protection when using the tool. Extended exposure to high
intensity noise is able to cause hearing loss.
Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be
used for the applicable conditions.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or
long hair can be caught in moving parts.
Stay alert, watch what you are doing and use common sense when operating the
tool while tried or under the influence of drugs, alcohol, or medication. A moment
of inattention while operating the tool increase the risk of injury to persons.
Avoid unintentional firing. Keep fingers away from trigger when not driving
fasteners, especially when connecting the tool to the air supply.Be sure the
hammer cap is off before connecting to the air supply. Do not carry the tool with
your finger on the hammer cap or connect the tool to the air supply with the trigger
on.
Keep proper footing and balance at all times. Do not overreach. Do not use on a
ladder or unstable support. Proper footing and balance enable better control of the
tool in unexpected situations.
Make sure the hose is free of obstructions or snags. Entangled or snarled hoses
can cause loss of balance or footing and may become damaged, resulting in
possible injury.
Do not attach the hose or tool to your body. Attach the hose to the structure to
reduce the risk of loss of balance if the hose shifts.
Always assume that the tool contains fasteners. Do not point the tool toward
yourself or anyone whether it contains fasteners or not.
Wash hands after handling. This product or its power cord may contain chemicals
to cause cancer and birth defects or other reproductive harm.
WARNING! Do not fire a nail on top of another nail. This may cause the nail to be
deflected and hit someone, or cause the tool to react which may result in a risk of
injury to persons.
WARNING! Remove finger from the trigger when not driving fasteners. Never carry
the tool with finger on trigger, the tool may fire a fastener.
18
PNT139-R
!
!
!
Publicité
