Télécharger Imprimer la page

Kohler K-9035 Instructions D'installation page 3

Publicité

Les langues disponibles

Les langues disponibles

Finished
Wall
Clean the Bottle Trap
Using a flat-blade screwdriver, turn the trap eye counterclockwise
until fully removed from the bottle trap body. Set the trap eye
with O-ring aside.
Clean out any debris that has collected in the bottle trap body.
Reinstall the trap eye with the O-ring to the bottle trap body.
One-Year Limited Warranty
KOHLER plumbing products are warranted to be free of defects in
material and workmanship for one year from date of installation.
Kohler Co. will, at its election, repair, replace or make appropriate
adjustment where Kohler Co. inspection discloses any such defects
occurring in normal usage within one (1) year after installation. Kohler
Co. is not responsible for removal or installation costs.
To obtain warranty service contact Kohler Co. either through your
Dealer, Plumbing Contractor, Home Center or E-tailer, or by writing
Kohler Co., Attn.: Customer Service Department, 444 Highland Drive,
Kohler, WI 53044, USA, or by calling 1-800-4-KOHLER from within the
USA, 1-800-964-5590 from within Canada and 001-877-680-1310 from
within Mexico.
Implied warranties including that of merchantability and fitness for
a particular purpose are expressly limited in duration to the duration
of this warranty. Kohler Co. and/or seller disclaims any liability for
special, incidental or consequential damages.
Kohler Co.
Bottle Trap
Body
O-Ring
Trap Eye
3
1054249-5-B

Publicité

loading