General Information - WIKA GDM-100 Mode D'emploi

1. General information

1. General information
The instrument described in the operating instructions has been designed and
■
manufactured using state-of-the-art technology. All components are subject to
EN
stringent quality and environmental criteria during production. Our management
systems are certified to ISO 9001 and ISO 14001.
These operating instructions contain important information on handling the
■
instrument. Working safely requires that all safety instructions and work instructions
are observed.
Observe the relevant local accident prevention regulations and general safety
■
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
■
vicinity of the instrument and readily accessible to skilled personnel at any time. Pass
the operating instructions on to the next operator or owner of the instrument.
Skilled personnel must have carefully read and understood the operating instructions
■
prior to beginning any work.
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Further information:
■
- Internet address:
- Relevant data sheets:
- Application consultant: Tel.: +49 9372 132-0
4
www.wika.de / www.wika.com
SP 60.02 Model GDM-100
SP 61.16 Model GLTC-CV
Fax: +49 9372 132-406
info@wika.com
WIKA operating instructions gas density monitor model GDM-100