3. Safety / 4. Transport, packaging and storage
3.10
Labelling, safety marks
Product label (example)
Schaltzustand bei Skalenanfangswert / Status of switch at minimum scale value
Model designation
Pin assignment
Case filling
P# product number
Date of manufacture
Switching thresholds
Electrical characteristics
Model designation of the switch contact
4. Transport, packaging and storage
4.1 Transport
Check the instrument for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
CAUTION!
Damage through improper transport
With improper transport, a high level of damage to property can occur.
▶
When unloading packed goods upon delivery as well as during
internal transport, proceed carefully and observe the symbols on the
packaging.
▶
With internal transport, observe the instructions in chapter 4.2
"Packaging and storage".
WIKA operating instructions gas density monitor model GDM-100
Dichtewächter mit Kontakteinrichtung
Density monitor with alarm contacts
EN
11