Velleman PEREL E300LS Mode D'emploi page 6

5. Operation
V. 01 – 13/12/2017
Testing the Detector
1. Test the detector at the point of time
you feel the lamp needs to be switched
on.
2. Turn the TIME knob fully anticlockwise
(dusk to dawn). Turn the LUX knob
fully clockwise to the maximum value.
3. Switch on the power. The detector needs
a warm-up time of ± 30 seconds before
it will switch on the connected lamp.
4. Turn the LUX knob fully anti-clockwise.
The lamp should switch off.
Setting the Detector
1. Turn the LUX knob until the lamp
switches on.
2. Now, set the switch-off delay with the
TIME knob going from 1 hour to all
night.
3. Close the detector with the cover and
tighten the screw.
LED Flashes
setting
1h
2h
3h
4h
5h
6h
7h
8h
9h
dusk to dawn
E300LS
6
flashes
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x rapidly
©Velleman nv