VITO PRO-POWER VII150A Mode D'emploi page 27

Component's list
1 Negative output terminal
2 Positive output terminal
3 Welding current adjustment knob
4 Welding current display
Shoulder strap holder
5
5
Carrying handle
6
Earth clamp
7
8 Electrode holder
Hand-held welding mask
9
Wire brush/chipping hammer
10
11 Handle for hand-held welding mask
12 Shoulder strap
Technical data
Power [kVA]:
Power supply:
Welding current range [A]:
Duty cycle [A]:
No-load voltage [V]:
Efficiency [%]:
):
Power factor (cos Ø
Welding type:
Output terminals
diameter [mm]:
Electrodes diameter [mm]:
Insulation class:
IP code:
Power cord [m]:
Earth clamp cable length [m]:
Electrode holder cable length
[m]:
Weight [Kg]:
Dimensions [mm]:
4.3
230 V AC 50 Hz
20 - 150
100% - 108
60% - 150
65
85
0.93
MMA, LIFT TIG
9.2
1.6 – 4
F
IP21S
1.6
1.7
1.7
4.7
140 x 330 x 230
Packaging content
1 Inverter welder VII150A
1 Electrode holder
1 Earth clamp
1 Wire brush/chipping hammer
1 Hand-held welding mask
1 Handle for hand-held welding mask
1 Shoulder strap
1 Instruction manual
Symbols
Security alert or warning.
To reduce the risk of injury, user must read the
instruction manual.
Electric shock hazard.
Respect the safety distance.
Packaging made from recycled materials.
Batteries or power tools should not be disposed of
together with household waste.
27