Velleman WC30D4 Mode D'emploi page 6

Reset
1. To reset the time and memory, press and hold the reset button with a piece
of metal (e.g. a blank paperclip).
2. All hands will move to the 12:00 position and the memory is cleared. The
clock will attempt to synchronize to the master clock.
8. Cleaning and maintenance
This device does not need any maintenance. However, wipe the device regularly
with a moist, lint-free cloth to keep it looking like new. Do not use alcohol or
solvents.
9. Technical Specifications
power supply ................................................. 1 x 1.5 V AA-battery (not incl.)
dimensions
dial ......................................................................................... Ø 25 cm
clock .................................................................................. Ø 30 x 6 cm
weight .............................................................................................. 560 g
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to change without prior notice.
RED Declaration of Conformity
Hereby, Velleman NV declares that the radio equipment type [WC30D4] is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.velleman.eu.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 01 – 07/12/2017
WC30D4
6 ©Velleman nv