Télécharger Imprimer la page

Mattel Fisher-Price DYR03 Mode D'emploi page 9

Publicité

Battery Installation Installation de la pile
--
D (LR20)
For longer life, use alkaline batteries.
Utiliser des piles alcalines pour une durée
plus longue.
B
A
1
• Pull to remove the pad from around the
retainers and the soothing unit
• Remove the pad bottom pocket from the
footrest
B
.
• Tirer sur le coussin pour le retirer des
dispositifs de retenue et de l'unité de
vibrations
A
.
• Retirer le repli inférieur du coussin du
repose-pieds
B
.
+
1,5V
A
A
.
2
• Loosen the screw in the battery compartment
door. Remove the battery compartment door.
• Insert one D (LR20) alkaline battery into the
battery compartment.
• Replace the battery compartment door and
tighten the screw.
• Pull and fit the pad seat bottom pocket
around the soothing unit and footrest.
• If this product begins to operate erratically,
you may need to reset the electronics. Slide
the power switch off and then back on.
• Desserrer la vis du couvercle du
compartiment de la pile. Enlever le couvercle.
• Insérer une pile alcaline D (LR20) dans
le compartiment.
• Remettre le couvercle et serrer la vis.
• Tirer sur le repli inférieur du coussin et le
placer autour de l'unité de vibrations et du
repose-pieds.
• Si le produit ne fonctionne pas correctement,
il peut être nécessaire de réinitialiser le
système électronique. Pour ce faire, éteindre
le produit puis le remettre en marche.
• Protect the environment by not disposing
of this product with household waste
(2012/19/EU). Check your local authority
for recycling advice and facilities.
• Protéger l'environnement en ne jetant pas
ce produit avec les ordures ménagères
(2012/19/EU). Consulter la municipalité
pour obtenir des conseils sur le recyclage et
connaître les centres de dépôt de la région.
9

Publicité

loading