Publicité
Les langues disponibles
Les langues disponibles
EN
1
Reverse running
2
On/Off button
3
Forward running
Positioning the Shredder and Starting It Up
The shredder only operates when the waste bin supplied is fitted and closed. Do not position the
shredder near any sources of heat and maintain a distance of at least 10 cm to walls. This ensures
the shredder is sufficiently cooled.
1
Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily
accessible power socket.
2
Slide the waste bin in the device. The waste bin latches audibly in place. If the waste bin is not
fitted in the device properly, the shredder cannot be switched on.
Only use the power cable supplied.
3
Connect the power cable to the device.
4
Connect the power plug to a power socket.
5
Switch the device on by pressing the On/Off button.
Î The status indicator lights up blue.
Î You have put the shredder into operation.
1
overload-red flashing
2
overload-red on
stand by-blue on
5
4
4
Overheating
5
Overloading
- 14 -
3
Publicité
