BorMann Elite BFN1025 Mode D'emploi page 3

EN
SAFETY INSTRUCTIONS
• Do not plug the power cord into a socket until the unit has been completely assembled.
• Plug the power cord only into a socket which has compatible voltage.
• During operation, don't put your hands or any other objects inside the guard.
• Do not attempt to force the louver to turn.
OPERATING INSTRUCTIONS
Speed control (Fig. 1)
• To turn on the fan, simply turn the speed control switch to ''1'', ''2'' or ''3''.
• To turn it off, turn the switch to ''0''.
Louver control (Fig. 2)
• Press the louver switch to turn louver movement on or off.
60 minute timer (Fig. 3
• The fan stops automatically at the set time.
• When switched to the ''OFF'' position, the fan will not operate.
• When switched to the ''ON'' position, the fan will run without automatically stopping.
CLEANING
• To clean the louver, first turn the louver cap to the left and remove it. Then remove the louver.
MAINTENANCE
• Keep the unit in a cool, dry place.
• Clean the fan with a piece of soft cloth soaked in soap water. Wipe the unit dry before operating it again.
• Do not use gasoline to clean the unit.
STORAGE
• If the fan is not going to be used for a long period of time, it is recommended to pack the unit into a vinyl bag and store it in a cool, dry place.
SPECIFICATIONS
3
BFN1025
Model
Voltage / Frequency 220-240 V / 50-60 Hz
Power 40 W
Diameter 30 cm
Cable length 1.8 m
Other features PP mesh, 5 PP blades, PP/ABS body
WWW.NIKOLAOUTOOLS.GR
Fig. 1
OFF
Fig. 2
10
OFF 20
ON
60 40
50
Fig. 3
ON
30