Forma 5 SKALA Mode D'emploi page 5

SKALA AND SKALA READY ELECTRICAL SYSTEM STAR-UP
Information for correct assembly
Information for correct assembly
It is important to reset the electrical system after assembly for it to function properly. Moreover, if while using
!
it you notice that electrical height adjustment is not working well, you must reset and check whether that has
solved the problem.
Reset the electrical system
Reset the electrical system
Information for correct assembly
Reset the electrical system
With these simple steps you will have reset the Skala or Skala Ready electrical system. If you release the button on one
of them before the sequence has ended, the reset will stop and you will have to start again.
(Start-up of the DESKLINE™ parallel system)
!
!
Press the down button for 20 seconds or until the movement has fully stopped.
20 sec.
20 sec.
Release the button.
<10 sec.
!
<10 sec.
5 sec.
Press it again before 10 seconds have elapsed. Hold it down for about 5
5 sec.
seconds until the table moves slightly. It will move about 5 mm.
20 sec.
<10 sec.
5 sec.