6
www.electrolux.com
25
26
27
28
29
30
31
32
33
If the operation mode or the fan speed is changed, the turbo
symbol will not be shown.
X-FAN
In COOL or DRY mode, press the button to enable or disable
the X-FAN function. If the X-FAN function is enabled, the
X-FAN symbol will be shown. Default setting: OFF.
If the X-FAN function is enabled, the indoor fan will continue
operation at low speed for 2 minutes after switching off
the unit. This function prevents the possible condensation
on cold parts of the indoor unit. Press the X-FAN button to
switch off the unit during the process.
If the X-FAN function is disabled, the unit will be switched off
immediately.
In AUTO, FAN or HEAT mode, X-FAN is not available.
ION-FILTER
Press the button to enable or disable the operation of the
health filter.
TIMER ON
Press the button to set the timer function for switching on the
unit. If the TIMER ON symbol blinks, press the UP or DOWN
button to set the time. Keep the button pressed for two
seconds to accelerate the process. Press the button to set
the timer. Default setting: 8:00 AM (12-hour mode). Press the
button again to cancel the timer function.
TIMER OFF
Press the button to set the timer function for switching off the
unit. If the TIMER OFF symbol blinks, press the UP or DOWN
button to set the time. Keep the button pressed for two
seconds to accelerate the process. Press the button to set
the timer. Default setting: 5:00 PM (12-hour mode). Press the
button again to cancel the timer function.
SWING-V
Press the button to enable or disable the vertical swing
function.
SWING-H
Press the button to enable or disable the horizontal swing
function.
I FEEL
Press the button to enable or disable the I FEEL function.
If the I FEEL function is enabled, the I FEEL symbol will be
shown.
If the I FEEL symbol is enabled, the remote control will send
the ambient temperature to the main unit every 10 minutes or
when you press one of the buttons.
QUIET
Press the button to enable or disable the QUIET function.
If the QUIET function is enabled, the indoor fan operates at
ultra-low speed so that the indoor noise is low.
SLEEP
Press the button to select (SLEEP 1, SLEEP 2, SLEEP 3 or
SLEEP CANCEL). Default setting: SLEEP CANCEL.
SLEEP 1
In COOL and DRY mode: