Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Problem
Dries unevenly.
Lint on clothes.
Items still wrinkled
after WRINKLE
RELEASE cycle.
Extended time.
If a problem persists, contact a local Samsung service center.
44
English
DV6900B_LED_WEB_Heatpump_EN.indd 44
Action
• Seams, pockets, and other similarly heavy areas may not
be completely dry when the rest of the load has reached
the selected dryness level. This is normal. You can choose
a higher dryness level or a cycle that involves a higher
dryness level.
• If one heavy item is dried with a light weight load, such as
one towel with sheets, it is possible that the heavy item will
not be completely dry when the rest of the load has reached
the selected dryness level.
• For the best drying results, dry heavy items and light weight
items separately.
• Make sure the lint filter is cleaned before every load. For
clothes that naturally build up lint, clean the filter during the
cycle.
• Some fabrics are lint producers (for example, a fuzzy white
cotton towel) and they must be dried separately from clothes
that are lint trappers (for example, a pair of black linen
pants).
• Divide larger loads into smaller loads for drying.
• Check pockets thoroughly before drying, then dry clothes.
• Remove lint inside the drum before drying.
• Small loads of 1 to 4 items work best.
• Load fewer items. Load similar-type items.
• Sensor Dry automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level is
reached.
• The drying time can change according to the type and
amount of laundry. See the cycle chart for reference.
• To prevent an overly long drying time, load no more than
half full.
2022/6/23 16:15:57
Publicité
