EZA 522349 Manuel D'utilisation page 8

Code F2 displayed
• Possible cause: condenser fan is overloaded. Disconnect power to fridge for 5 minutes & re-
start. If the code shows again, contact manufacturer for service.
Code F3 displayed
• Possible cause: the compressor starts too frequently. Disconnect power to fridge for 5
minutes & re-start. If the code shows again, contact manufacturer for service.
Code F4 displayed
• Possible cause: compressor not kicking in. Disconnect power to fridge for 5 minutes & re-
start. If the code shows again, contact manufacturer for service.
Code F5 displayed
• Possible cause: overheating of the compressor & electronics. Disconnect power to fridge for
5 minutes & re-start. If the code shows again, contact manufacturer for service.
Code F6 displayed
• Possible cause: no parameter can be detected by the controller. Disconnect power to fridge
for 5 minutes & re-start. If the code shows again, contact manufacturer for service.
Code F7 or F8 displayed
• Possible cause: temperature sensor is faulty. Contact manufacturer for service.
7. WARRANTY
If the device gets malfunctional, limited warranty will be provided for 1 year from the date of
purchase, except following situations:
• Contrived damage.
• Damage caused by force majeure such as earthquake, conflagration, etc.
• Damage from inappropriate use or violating this instruction.
• Damage or malfunction caused by disassembling.
8. TECHNICAL INFORMATION
*Due to product improvement, the technical information might be different from actual
Information, please refer to the rating label on the product.