RealFlame Baltic T9620 NG Manuel D'utilisation page 16

Thermocouple
3. Make sure that the igniter pin and thermocouple are correctly positioned.
- The igniter pin should be pointed straight to the thermocouple.
- The thermocouple should be positioned 5mm away from the burner tube.
Thermocouple
Wire
4. Make sure that the thermocouple wire is correctly positioned. The
thermocouple wire should be in line with the valve.
Gas Component Connection Checks (Cont.)
Valve
Igniter Box
5mm
Thermocouple Wire
Igniter Pin
Wire should
be in line
with valve
Valve
16