Adjusting The Laser - ALFRA RotaSpeed RS 230 Mode D'emploi

Never aim the beam at a work piece with a reflective surface. Highly polished or similar
reflective surfaces are not recommended for laser use where eye exposure is possible due to
reflection. These surfaces could reflect the beam toward the operator or bystanders.
Always consider the path of possible beam deflection.
Operation of the laser
Push the button (A) to turn the laser on and off.
At a 90° adjustment of the blade guard the laser always points at the notch (B). At a 45° adjustment it points at the
notch (C). At angle adjustments between 90° and 45° the laser points at no particular benchmark.

Adjusting the laser

By loosening or tightening of the set screw (A) with an Allen key the laser direction can be adjusted.
A
B
26