ALFRA RotaSpeed RS 230 Mode D'emploi page 25

Adjusting the cutting depth
1. Loosen the lock lever (A).
A
2. Lift up the rear part of the saw (away from the blade guide) until you reach the required cutting depth.
A
3. Tighten the lock lever (A).
Laser alignment guide precautions
Laser radiation!
Avoid direct eye exposure. Do not stare into the laser light source. Never aim light at another
person or object other than the work piece. Laser light can damage your eyes.
Do not use tinted glasses to enhance the laser light! Tinted glasses will reduce overall vision
for the application and interfere with the normal operation of the tool.
Fig.15
Fig.16
Avoid exposure! Laser radiation is permitted from this aperture.
25