Publicité
Les langues disponibles
Les langues disponibles
ETQ
EASTERN TOOLS & EQUIPMENT INC
Handle Bar Assembly
·Secure the bracket bolt and nut.
·Make sure that the bracket is nicely tightened
down.
·Place the handle bar into the bracket.
·Secure with a bolt and nut
Instruction for the use of the lifting bracket.
The lifting bracket is for lifting the generator which
is described in the instruction manual, and it can
bear 3 to 3.5 times the net weight of the
generator.
Operation process:
Step 1: Take the lifting bracket attachment out of
the box and then enter it from the end of the frame
(see below picture).
Step 2: Move it towards the middle of the frame
(please note it does not interfere with or scratch
the fuel tank). (See below picture)
Tel: (888)908-6200
BOLT
ABNORMITY
IMMOBILITY PIECE
HANDLE PIPE
Step 3: Move it to the middle of the frame. (See
below picture)
Step 4: Lift the generator slowly.
Step 5: Remove the lifting bracket by following
(step 3→step 2→step 1) and then fasten it on the
frame as standby.
5
Web Site: easterntools.com
NUT
Publicité
