GE GTE21 Manuel D'utilisation page 20

REVERSING THE DOOR SWING
REVERSING DOOR HANDLES –
6
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE
FREEZER DOOR
1. Remove the two screws
securing the top end of
the handle with a Phillips
screwdriver and remove the
GE badge.
2. For Plactic handle: Pull handle
up and off of the fastener on
the door
For Stainless
Steel handle:
Loosen set screw
on handle with
1/8" wrench and
remove handle.
3. Remove the fastener from the surface of the
refrigerator door, and cover the new vacant hole
with the plug from the opposite side..
Installation Instructions
(CONT.)
20
REVERSING DOOR HANDLES –
6
TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT SIDE OF THE
FREEZER DOOR (CONT.)
4. Insert the fastener into the
surface of the right side
of the freezer door with a
Phillips screwdriver.
5. For Plactic handle:
Attach handle to
the freezer door on
fastener and slide
upward to lock in
place with the screws
at the bottom of the
handle.
For Stainless
Steel Handle:
Attach the
handle to the
freezer door
with screws at
the bottom of
the handles.
Use 1/8" allen
wrench to
tighten the
set screw at
the top of
thehandle.
NOTE: Do not over-tighten.