Publicité
Les langues disponibles
Les langues disponibles
sMartFleX MeNu list
The SmartFlex menu is available in all modes and is a sub-menu that allows you to control various functions of your
device. It is accessed by pressing the down button while in this Advanced Menu.
Display Example
SmartFlex
3
SmartFlex Mode
Full Time
SmartFlex IRnd
3
SmartFlex ERnd
3
Exit Menu
Press
BloWer oFF MeNus
Compliance information can be viewed without turning the CPAP on. With the blower OFF (display shows OFF), press the
left or right arrow keys on the keypad to scroll through the information.
Display Example
OFF
Quick View Menu
Press
Serial Number
MD000005
Adherence Score
83% (25/30)
SmartCode
B6CD-37F-35M2
SmartCode
9CCC-377D-7JMV
SmartCode
EWY4-3DB7-DJM1
SmartCode
C52TT-47DB-7DTMJ
SmartCode
ZDN-79FK-KMN
A-DV57
Description
This setting controls the amount of pressure relief.
OFF = SmartFlex feature is OFF
1 = least amount of pressure relief
3 = most amount of pressure relief
This setting controls the SmartFlex operating mode.
Full Time means SmartFlex feature is always active
Delay Only means SmartFlex feature is active only during the pressure delay cycle.
This setting controls the Inhale pressure waveform.
This setting controls the Exhale pressure waveform.
Pressing the up key exits the SmartFlex menu
Description
Blower OFF, the CPAP unit is plugged in to AC or DC power with the blower OFF.
Pressing the down key enters the Quick View menu. Refer to page EN-20 for Quick
View Menu details. NOTE: The "Quick View" menu is only shown if enabled from the
clinical menu.
Shows the serial number of the device.
Shows the maximum adherence achieved for any period of thirty consecutive days of
use within a ninety-day time frame. The score represents the percentage of days,
within thirty consecutive days, where usage met or exceeded the 'Usage Threshold.'
SmartCode data is used for therapy management reporting; therapy information is
1-Day
encoded in a series of letters and numbers, and includes a special character for error
checking to ensure accuracy. Use the UP arrow or DOWN arrow keys to change the
7-Day
SmartCode reporting period. There are five levels of SmartCode data– 1-day, 7-day,
30-day, 90-day and Usage. Use UP or DOWN button to change between levels.
30-Day
90-Day
Usage
eN - 19
Publicité
