Publicité
Les langues disponibles
Les langues disponibles
4-Port External USB 3.0 PCI Express Card
A message is displayed stating that not enough power can
be given to the connected device.
Make sure to connect the 4-pin power cable on board to provide
efficient power to USB devices. However, using the device's own
power source is the most efficient method.
Is it possible to connect current USB 1.1 or 2.0 devices to
the USB 3.0 PCI Express card?
Yes, this works. Device will not obtain the USB 3.0 speeds, USB
2.0/1.1 speeds only.
If you updated the Windows from Windows 7/8 to Windows 10
and encountered issues, please follow the steps below.
1. With the device plugged in, open Device Manager
2. Locate "Renesas Electronics USB 3.0 Host Controller" under
Device Manager
3. Right click on it and left click on Uninstall. Check the box "Delete
The Driver Software For This Device"
4. Reboot the system.
5. Once booted back into Windows 10, Windows will recognize the
device and install the device using the built in drivers. It will
appear as "Renesas USB 3.0 eXtensible Host Controller - 1.0
(Microsoft)" in Device Manager.
User Manual
RC-508
12
4-Port External USB 3.0 PCI Express Card
En
French
Table des matières:
Chapitre 1 : Présentation.........................................14
1.1 Informations sur le produit ..................................14
1.2 Fonctionnalités....................................................15
1.3 Configuration système requise............................15
1.4 Contenu de l'emballage.......................................15
Chapitre 2 : Démarrage...........................................16
2.1 Installation du matériel.........................................16
2.2 Installation du pilote.............................................16
2.3 Vérification du matériel.........................................18
2.4 Pour désinstaller le pilote.....................................19
Chapitre 3 : Conseils de dépannage.......................21
User Manual
RC-508
Fr
Publicité
