Rosewill RC-508 Manuel De L'utilisateur page 4

4-Port External USB 3.0 PCI Express Card
Chapter 2: Getting Started
2.1 Hardware Installation
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer's cover.
3. Remove the slot bracket from an available PCIe slot.
4.To install the card, carefully align the card's bus connector with the
selected PCIe slot on the motherboard. Push the board down firmly.
5. Replace the slot bracket's holding screw to secure the card.
6. Secure the computer cover and reconnect the power cord.
2.2 Driver Installation
Windows 10 will find or use generic drivers automatically.
1. Insert the provided CD into your disk drive. The CD-ROM will
start automatically. When the following screen appears, please click
"Install Driver".
*Note: Actual image may vary
Note: If the install program doesn't run automatically, please locate
and double-click on the Autorun.exe file in the CD to launch the
install program.
User Manual
RC-508
En
6
4-Port External USB 3.0 PCI Express Card
2. Please click "720201/720202" to start the installation.
*Note: Actual image may vary
3. Click "Next" to continue.
Please check "Accept License Agreement" box, and click "Next" to
continue.
User Manual
RC-508
En
7