English
Trouble-shooting guide
Trouble
Does not ignite
Smell of gas
Flame lifts off from
the burners in
flash back with a
roaring sound
Cause
Main gas stopcock is not turned on
Air remains in the gas piping
Bento or crushed rubber tubing
Cracks or holes in the rubber tubing
Rubber tubing not connected properly
Failure of the gas cook
Air supply is not properly adjusted
Burner is not titled properly
Flame outlet of burner is clogged
Nozzle is clogged
Turn off gas cock once and
then turn it on fully
Repeat ignition operation until
all air in the piping is purged
out completely
Straighten it or replace it
Replace it with a new one
Connect the rubber tubing
properly
Request the dealer to repair
Adjust it properly
Fix burner body properly
Clean the clogged part
Request the dealer to repair
8
Solution