Amplicomms TCL 400 Mode D'emploi page 26

To set time and the snooze duration
(U.K. version: default time at 12:00 AM and 12Hr time format. No
time zone selected.)
(German version : default time at 0:00 and 24Hr time format)
Press SET once, "00" flash, press L/M to set the time zone
1.
(for german version only).
"00" = GMT +1 hour (e.g. Germany)
"01" = GMT +2 hours (e.g. Finland)
"-01" = GMT 00 hour (e.g. U.K.)
Press SET again, the hour digits flash. Press L or M to set
2.
the time in hours (hold L/M to advance rapidly).
Press SET again, the minute digits "00" flash. Press L or M
3.
to set the time in minutes (hold L/M to advance rapidly).
4. Press SET again, the display shows time format and
flashes. Press L or M to select "12HR" or "24Hr" time
format.
If "12Hr" is selected, the PM LED will appear on the lower
right to indicate the afternoon time; there is no AM
indicator.
5. Press SET again, the display shows "05" and flashes. Press
L or M to select your snooze time from 5 to 60 minutes.
6. Press SET again or if no key pressed for approx. 10
seconds to exit the setting mode.
(See chapter "Helpline" for costs and hours of operation)
Helpline UK 0844 800 6503
S / O
ETTING
A
PERATION NHANG
23