Proline L2330HD Manuel D'utilisation page 26

Menu Operation
Symbol Rate: Press the ◄/► button to select Symbol Rate: Auto or enter digital
numbers.
Modulation: Press the ◄/► button to select Modulation: Auto, 16QAM, 32QAM,
64QAM, 128QAM, 256QAM.
Start: Press the ENTER button to start the channel search.
Strength: Display the quality of current TV signal.
- Analog Manual Scan: Press the ▲/▼ button to select the Analog Manual Scan,
then press the ENTER button to enter sub-menu.
Analog Scan: Press the ◄/► button to select Analog Scan.
Channel to Save: Press the ◄/► button to select channel.
Color System: Press the ◄/► button to select Color System: Auto, PAL or SECAM.
Sound System: Press the ◄/► button to select Sound System: Auto, DK, BG, I or L.
AFC (Automatic Frequency Control): Press the ◄/► button to select On or Off.
Start: Press the ENTER button to start the channel search.
• Channel Edit
First press the ▲/▼ button to highlight the channel you want to delete, skip, rename
or swap, then:
Press the red button to delete the channel.
Press the green button to skip the channel. (Your TV set will skip the channel
automatically when using CH+/- to view the channels.)
Press the yellow button to rename the channel (in ATV mode).
Highlight the channel you would like to move and press blue button, then press the
▲/▼ button to move it to the position you want, and press blue button again.
You can also highlight a channel, press blue button, highlight another channel and
press blue button again to swap them.
• Common Interface (in DTV mode)
This function enables you to watch some encrypted services (pay services).
Please insert CI card into the PCMCIA slot following the arrow on the CI card.
NOTE:
This function can only be used when CI slot is available.
Please do not insert or pull out the CI card when TV is powered on.
Do not insert or pull out the CI card frequently so as to avoid any damage to the TV
or CI card.
During initialization of the CI card, please don't operate the TV.
• Signal Information (in DTV mode)
Display the current signal information: Network Name, Channel, Frequency,
Modulation, Strength, Quality.
Note: with Antenna tuner type, the Signal Information menu will display the channel,
whereas this will not be the case with Cable tuner type.
• CICAM Profile Edit
Press the ENTER button to enter sub-menu.
23