Publicité
Les langues disponibles
Les langues disponibles
REPLACING THE GUIDE BAR AND SAW CHAIN
WARNING:
Always use a low-kickback saw chain, which
significantly reduces the danger of kickback. Low-kickback
saw chain does not completely eliminate kickback. A low-
kickback or "safety chain," should never be regarded as
total protection against injury.
When replacing the guide bar and saw chain, only use the
replacement parts specified by the manufacturer or their equivalents.
Refer to Replacement Parts. Use of any unauthorized parts or
accessories could lead to serious injury to the operator or damage to
the unit and will VOID the warranty.
Always use a replacement saw chain designated as "low-kickback"
or a saw chain that meets the low-kickback performance
requirements. A standard saw chain (a chain that does not have the
kickback-reducing guard links) should only be used by an
experienced professional chain saw operator.
MAINTAINING THE AIR FILTER
WARNING:
To avoid serious personal injury, always stop
the engine and allow it to cool before cleaning or maintaining
the unit.
Failure to maintain the air filter can result in poor performance or can
cause permanent damage to the engine. Engine failure due to
improper air filter maintenance is not covered by the product warranty.
Cleaning the Air Filter
1. Turn the knob on the air filter cover counterclockwise to loosen
the air filter cover (Fig. 42).
2. Remove the air filter cover (Fig. 42).
3. Remove the air filter (Fig. 43).
4. Wash the air filter in mild detergent and water. Rinse the air filter
thoroughly and allow it to dry.
5. Reinstall the air filter onto the mounting post (Fig. 43). Make sure
the opening in the air filter sits securely in the air intake (Fig. 43).
NOTE: Operating the unit without the air filter and air filter cover will
VOID the warranty. Keep a supply of spare air filters.
6. Place the air filter cover back onto the unit. Insert the two tabs on
the air filter cover into the two slots on the chain saw housing
(Fig. 42).
7. Turn the knob clockwise to tighten the air filter cover securely.
Lubrication Hole
Guide Bar Tip Lube Gun
Slots
Air Filter
25
Guide Bar Sprocket Tip
Fig. 41
Tabs
Fig. 42
Air Intake
Mounting Post
Fig. 43
Air Filter
Cover
Knob
Publicité
