Publicité
Les langues disponibles
Les langues disponibles
STEP 7
FOR VEHICLES WITH 2" RECEIVERS
An Adapter (17) is needed to complete the installation process. Place the adapter on the passenger side of the Z-Type
Connecting Tube (1), making sure to align the holes. Keep the holes aligned as you insert the Adapter (17) and Z-Type
Connecting Tube (1) into the vehicle's receiver and align the receiver tube's holes with the holes on the bike carrier.
Place a φ 1/2" Spring Washer (15) and φ1/2" Flat Washer (16) on the outside of the receiver tube, aligning the holes
with the holes in the receiver tube. Insert the φ1/2" Bolt (14) through the φ 1/2" Spring Washer (15), φ1/2" Flat Washer
(16), receiver tube, Adapter (17) and Z-Type Connecting Tube (1). Secure the assembly with a Cotter Pin (18).
9
Publicité
