Publicité
Les langues disponibles
Les langues disponibles
•
Do not overload beyond the manufacturer's weight capacity of 100 lbs.
•
Do not carry more than 2 bikes on the carrier.
The bike rack is not intended for transporting humans or animals.
•
If you are planning to load only one bike, it is recommended to place it in the position closest to the vehicle.
•
All bikes must be secured with the buckle pull belt and holder, which must both must be tightened before operating
•
the vehicle.
•
Make sure the front of the bike(s), when mounted, are at or above the bottom of the bumper to avoid damage to
the bike(s).
•
Do not carry flammable items on the bike rack.
•
The bike rack is designed to carry non-motorized bikes only.
•
During long trips, check the straps and bike position, especially if traveling on rough terrain.
Please do not make alterations to the product, as it can pose potential hazards to your safety.
•
•
Failure to heed these warnings may result in personal injury and/or property damage.
•
To prevent serious injury or death, inspect the bike rack for any signs of wear, corrosion and fatigue before each use.
Do not use the bicycle rack if parts are bent, broken, deformed or missing. Remove it from your vehicle before use.
ASSEMBLY INSTRUCTIONS
Note: A 4mm Allen Wrench (not included) is recommended for assembly.
STEP 1：
Insert the Z-Type Connecting Tube (1) into the U-Shaped Main Frame (2) as shown below. Make sure
to align the holes.
⚠ WARNING⚠
3
Publicité
