ENERMAX REVOLUTION87+ Manuel D'utilisateur page 8

 CONNECTOR TYPES
24P Mainboard
For new generations of ATX/EEB/CEB server/workstation MB.
8P CPU +12V
Native cable, 12V rail supplied by 12V1 (750/850/1000W)
8-pin configuration supports multi-CPU server/workstation systems and some single
extreme CPU systems.
4+4P(8P) CPU+12V, in combined mode
Native cable, 12V rail supplied by 12V1
8-pin configuration supports multi-CPU server/workstation systems and some single
extreme CPU systems.
4+4P(8P) CPU+12V, in split mode
Native cable, 12V rail supplied by 12V1
4-pin configuration supports certain single CPU systems. Some multi-CPU
workstation/server system might also need this extra 4-pin 12V connector.
Please use the connector with "12V" marking.
6+2P (8P) PCI Express, in combined mode
12V rail supplied by 12V4 on native cables (850/1000W)
8-pin configuration supports latest extreme graphic cards, which require 8-pin PCI-E
connector.
6+2P (8P) PCI Express, in split mode / 6P PCI Express
12V rail supplied by 12V4 on native cables (850/1000W)
6-pin configuration supports most performance PCI-E graphic cards, which require
6-pin PCI-E connector.
SATA
For SATA/SAS drives.
4P Molex
For IDE/SCSI/SAS drives or some AGP graphic card with traditional 4P power in
socket.
FDD
For floppy drive or certain add-on card.
#1 Some SATA drives might accept SATA or 4P Molex power. Normally, use either one of power
connector to power the driver, BUT NOT BOTH! Please check the drive's manual for details.
#2 Some MB might require this connector to share the +12V current from 24-pin Mainboard connector to
PCI-E slot. If your system has multiple extreme graphic cards, please plug this connector to MB
correspond socket and check the MB's manual for details.
 MODULAR CABLES SUPPLIED
Use ONLY genuine ENERMAX modular cables coming with ENERMAX PSU. Third party cables might
not be compatible and might cause damage to your PSU and/or system, and use of third party cable shall
void PSU warranty.
Special note for System Integrators: If your system requires special modular cable configuration or
design, please contact an ENERMAX sales representative.
# 1
# 2
EMC014-G: 2 x 6+2P (8P) PCI-E 2.0
Modular cable for 1 or 2 performance PCI Express graphic cards, which
needs 6P or 8P PCI-E connector.
EMC019-G: 4 x SATA drives
Modular cable for SATA/SAS drives like ODD and HDD.
EMC020-G : 4 x 4P Molex (IDE/SCSI) drives & 1 x FDD connector
Modular cable for IDE/SCSI/SAS drives and peripheral, plus 1 FDD
power connector.
EMC021-G: 2 x SATA & 2 x 4P Molex
Modular cable for SATA/SAS/IDE/SCSI drives and other peripherals.
6